Yamaha EMX5 12-channel 1260W Powered Mixer

Item Code: EMX5 | Brand: Yamaha

True False
OMR 288.000

In Stock! Available for immediate delivery!

Share this with your friends:

The new EMX7 and EMX5 were designed specifically for musicians, performers, or public speakers who put a premium on sound quality and convenient operation, and are ready to take their sound reinforcement to the next level. Despite their compact construction, only speakers and a microphone are required to configure a fully functioning, extremely portable, and reliable sound system with all the tools you need to mix, process, and deliver your audio just the way you want, anywhere you want.
 

Tech Specs

  • Level Meter : 2 × 7 points LED meter (-20, -10, -6, 0, +6, +10, PEAK)
  • Frequency response : Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz
  • Inputs : TOTAL 12 channels : 8 Mono (MIC/LINE), 4 Stereo (LINE)
  • Phantom power : +48 V
  • Outputs : SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]
  • Control and others : FOOT SWITCH : Effect Mute on/off
  • Bus : Stereo: 1, AUX: 2 (Including FX)
  • PAD : 30 dB (CH1-4)
  • Hi-Z : Supported (CH4)
  • HPF : 80 Hz, -12 dB/oct. (CH1–3)
  • COMP : 1-knob COMP (CH1–4)
  • EQ HIGH : 10 kHz +15 dB / -15 dB (Shelving)
  • EQ MID : 2.5 kHz +15 dB / -15 dB (Peaking)
  • EQ LOW : 100 Hz +15 dB / -15 dB (Shelving)
  • DSP : SPX Algorithm 24 programs, Feedback suppressor, Master EQ, Monitor EQ
  • Maximum output power @4ohms : 1kHz THD+N less than 10% (CEA2006) : 630 W + 630 W, 1kHz THD+N less than 1% (CEA2006) : 500 W + 500 W
  • Equivalent input noise : -117 dBu (Noise is measured with A-weighting filter)
  • Load protection : DC-fault
  • Maximum output power @8ohms : 1kHz THD+N less than 10% (CEA2006) : 460 W + 460 W, 1kHz THD+N less than 1% (CEA2006) : 370 W + 370 W
  • Amplifier protection : Over heat protection, Over current protection, Integral power protection
  • Total harmonic distortion : Input to SPEAKERS: 0.1% @ 10 W (40 Hz to 20 kHz), 0.05% @ 50 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: 0.03% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF)
  • Residual output noise : Input to SPEAKERS : -66 dBu (40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -80 dBu (20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter)
  •  

Customer Reviews

Based on 0 reviews

Write your review

  



Recently Viewed Items    Clear history